Mac Connection Scripts
OT/PPP or Remote Access

In the following steps, "PPP" can be substituted for "Remote Access" throughout.

1. Open the Remote Access control panel and click "Options".
2. Click the Protocol tab.
3. Click the "Connect to a command line host" checkbox to select it, then click "Use terminal window."
4. Click "OK".
5. Ensure that the name, password, and telephone number are correct, then click "Connect." The modem will dial out and begin negotiation before opening the terminal window.
6. When the terminal window appears, click "Settings".
7. Click the "Prompt to save Connect Script on close" checkbox to select it. To have the terminal window close automatically after a connection to the host has been established, click the "Close Terminal when PPP is started" checkbox to select it.
8. Click "OK".
9. In the terminal window, enter the information requested by the command-line prompts. Press Return at the end of each response. If no command-line prompts appear, such as "login" or "password," press Return once.
10. If the terminal window does not close automatically, click "Continue" to close it.
11. When the connection is completed, the following dialog box appears. Name the script, click the "Desktop" button to save it on your desktop, then click "Save". Remember where it was saved, because it will be needed in the next step.

    Important: An effective connect script is created by saving the session of a successful connection. Do not save the session if the connection was unsuccessful.

12. To use the saved connect script, return to the Protocol panel of the Options window and click "Use connect script." Then click "Import Script."
13. Select the previously saved connect script from the open file dialog box that appears. Afterward, its name will appear above the "Import Script" button.
14. Click "OK". The connect script is ready to use.